Condensate is an unavoidable result of air compression. It is a chemically aggressive fluid that mainly consists of water, but also contains oil and dirt particles.
Oil carryover is unavoidable if you have compressors that use oil in the compression chamber. The lubricant will mix with the condensation and create an oily water that must be properly handled to avoid violating environmental regulations.
Just one litre of used oil can contaminate up to one million litres of fresh water. This is the reason that environmental regulations strictly prohibit the discharge of oily wastes and chemicals, including the condensate drained from a compressed air system.
Compressed air condensate must therefore be treated in accordance with water resource legislation to achieve prescribed safety levels before it can be disposed of in the waste water system. Compressor condensate must therefore be either collected and treated by special processes or treated prior to disposal to the environment. An oil/water separator can be used here to remove the oil from the condensate. Since the condensate is approximately 95% water and 5% oil, water/oil separators have been developed to reduce or eliminate the amount of oil in the condensate.
Industrial Air Technologies
Specialising in air compressors and complete air treatment
IRELAND: +353 (0) 1 440 3956 - UK: +44 (0) 1908 227892
Air Compressors - In-Line Filters - Air Driers - Breathing Air - Condensate Management - Air Chillers - Coolers - Automotive Air
Compressor Heat Recovery System
Termowatt Equipment
TERMOWATT
​
Heat Recovery from your installed air compressor is FREE and EFFICIENT to recover. Ideally your air compressor will be 22 kw and above and you used domestic hot water for cleaning or washing applications and may have a requirement to warm air injection into the workplace.
​
It is possible to recover over 90% of the installed compressor motor power. For example if you have a 100 kW air compressor it is possible to recover over 90% of the motor power (90%).
​
Simple to install to nearly ALL lubricated screw compressors.
​
For more detail information on our heat recovery system please contact us now: 00353 (1) 440 3956