Condensate is an unavoidable result of air compression. It is a chemically aggressive fluid that mainly consists of water, but also contains oil and dirt particles.
Oil carryover is unavoidable if you have compressors that use oil in the compression chamber. The lubricant will mix with the condensation and create an oily water that must be properly handled to avoid violating environmental regulations.
Just one litre of used oil can contaminate up to one million litres of fresh water. This is the reason that environmental regulations strictly prohibit the discharge of oily wastes and chemicals, including the condensate drained from a compressed air system.
Compressed air condensate must therefore be treated in accordance with water resource legislation to achieve prescribed safety levels before it can be disposed of in the waste water system. Compressor condensate must therefore be either collected and treated by special processes or treated prior to disposal to the environment. An oil/water separator can be used here to remove the oil from the condensate. Since the condensate is approximately 95% water and 5% oil, water/oil separators have been developed to reduce or eliminate the amount of oil in the condensate.


Industrial Air Technologies
Specialising in air compressors and complete air treatment
IRELAND: +353 (0) 1 440 3956 - UK: +44 (0) 1908 227892
Air Compressors - In-Line Filters - Air Driers - Breathing Air - Condensate Management - Air Chillers - Coolers - Automotive Air

OMEGA-Air have manufactured red filter elements for many or the world leading OEM's.
OMEGA are recognised for the product quality and technical know-how and provide a full range of alternative OEM filter elements.
​
Filters are available for the main following brands:
​
ABAC, AGRE, AIRFILTER ENGINEERING, ALMIG, ALUP, ATLAS COPCO, ATS, BALMA, BEA ARS, BEA ARV, BEA BST, BEKO, BOGE, CECCATO, CHICAGO PNEUMATIC COMPAIR, CHAUMECA CRB, DELTECH, DOMNICK HUNTER, DONALDSON DF, DONALDSSON ULTRAFILTER, ULTRAFILTER 90 SERIES,ULTRAFILTER 80 SERIES, EKOMAK, FIAC, FINITE J, FUSHENG HANKIISON, HIROSS, HITACHI, INGERSOLL RAND AC, INGERSOLL RAND F, INGERSOLL RAND FA, KAESER, KAESOER HP, KNOCKS, KOBELCO, KSI, MARK, MATTEI, MAUGUIERE, OMI, ORION, PNEUMATECH, PREVOST MICRO, PREVOST, P[USKA, SHNEIDER, SMC, SPX, SULLAIR, WALKER OWA, WALKER, HP, WLAKER, WOTHINGTON CRYEYSSENSAC, ZNADER
​
To make an enquiry
regarding an element
please contact us:
​
IRELAND - 00353 (1) 440 3956
UK - +44 (0) 1908 227892
​
email: info@omega-air.ie
​
​
Full Manufacturers list:
​
ABAC (new) - plastic end caps
ABAC (old) - plastic end caps
AGRE (new)- plastic end caps
AGRE (old) - plastic end caps
AIRFILTER ENGINEERING - plastic end caps
AIRFILTER ENGINEERING - aluminium end caps
ALMIG - plastic end caps
ALUP (new) - plastic end caps
ALUP (previous) - plastic end caps
ALUP (old) - plastic end caps
ATLAS COPCO + - plastic end caps
ATLAS COPCO - plastic end caps
ATLAS COPCO - aluminium end caps
ATLAS COPCO (old) - plastic end caps
ATLAS COPCO (old) - aluminium end caps
ATS - plastic end caps
BALMA - plastic end caps
BEA ARS - aluminium end caps
BEA ARV - aluminium end caps
BEA BST - aluminium end caps
BEKO - plastic end caps
BOGE HP - plastic end caps
BOGE - plastic end caps
CECCATO (new) - plastic end caps
CECCATO (old) - plastic end caps
CHAUMECA CRB - aluminium end caps
CHICAGO PNEUMATIC (new) - plastic end caps
CHICAGO PNEUMATIC (old) - plastic end caps
COMPAIR - plastic end caps
COMPAIR (previous) - plastic end caps
COMPAIR (previous) - aluminium end caps
DELTECH 300 - plastic end caps
DELTECH - aluminium end caps
DOMNICK HUNTER oil-x evolution - plastic end caps
DOMNICK HUNTER oil-x plus - plastic end caps
DOMNICK HUNTER oil-x plus - aluminium end caps
DOMNICK HUNTER HT - aluminium end caps
DOMNICK HUNTER NH3 - stainless steel end caps
DONALDSON DF - plastic end caps
DONALDSON 90` series - plastic end caps
DONALDSON 90` series - aluminium end caps
DONALDSON 80` series - aluminium end caps
Alternative silicone and grease free filter elements
DONALDSON - silicone and grease free plastic end cap
DONALDSON - silicone and grease free aluminium end cap
Alternative sterile/vent filter elements
DONALDSON - stainless steel end caps 1.4301 (304)
Alternative process filter elements
DONALDSON - stainless steel end caps 1.4301 (304)
EKOMAK - plastic end caps
EKOMAK - aluminium end caps
FIAC - plastic end caps
FINITE J - aluminium end caps
FINITE (old) - aluminium end caps
FUSHENG (new) - plastic end caps
FUSHENG (old) - plastic end caps
FUSHENG (old) - aluminium end caps
HANKISON NGF - plastic end caps
HANKISON - aluminium end caps
HIROSS (new) - plastic end caps
HIROSS (new) - aluminium end caps
HIROSS (old) - plastic end caps
HIROSS (old) - aluminium end caps
HITACHI - aluminium end caps
INGERSOLL RAND AC - plastic end caps
INGERSOLL RAND F - plastic end caps
INGERSOLL RAND FA - plastic end caps
KAESER (old) - aluminium end caps
KAESER HP - aluminium end caps
KNOCKS - aluminium end caps
KOBELCO - plastic end caps
KSI - plastic end caps
MARK (new) - plastic end caps
MARK (old) - plastic end caps
MATTEI OMAT - plastic end caps
MAUGUIERE (new) - plastic end caps
MAUGUIERE (old) - plastic end caps
MIKROPOR G - aluminium end caps
OMI Alps - plastic end caps
OMI (old) - plastic end caps
ORION (new) - plastic end caps
ORION (new) - aluminium end caps
PNEUMATECH (new) - plastic end caps
PNEUMATECH (old) - plastic end caps
PREVOST MICRO - plastic end caps
PREVOST - aluminium end caps
PUSKA (new) - plastic end caps
PUSKA (old) - plastic end caps
SCHNEIDER - plastic end caps
SMC - plastic end caps
SMC - aluminium end caps
SPX NGF - plastic end caps
SULLAIR - plastic end caps
WALKER OWA Alfa - plastic end caps
WALKER - aluminium end caps
WALKER HP - aluminium end caps
WORTHINGTON CREYSSENSAC (new) - plastic end caps
WORTHINGTON CREYSSENSAC (old) - plastic end caps
ZANDER GL - plastic end caps
ZANDER - plastic end caps
ZANDER - aluminium end caps
Alternative sterile/vent filter elements
ZANDER - stainless steel end caps 1.4301 (304)
Alternative process filter elements
ZANDER - stainless steel end caps 1.4301 (304)
ZONDER - plastic end caps
​
​
​















